When engineers select Geomembran HDPE for containment or waterproofing projects, they most commonly reference the GRI GM13 and GM17 international standards. Although both standards define high-performance lining systems, they specify significantly different mechanical properties, durability levels, and application scenarios.
This guide explains the key differences between GM13 and GM17 geomembranes, helping engineers, contractors, and project owners choose the right specification for their projects.
GM13 vs GM17 HDPE Geomembrane Comparison
| Parameter | GM13 | GM17 |
|---|---|---|
| Bahan | HDPE | HDPE |
| Kepadatan | ≥ 0,940 g/cm³ | ≥ 0,940 g/cm³ |
| Ketebalan Khas | 0.75 – 2.0 mm | 1.0 – 3.0 mm |
| Tensile Yield Strength | ≥ 31 N/mm | ≥ 34 N/mm |
| Tensile Break Strength | ≥ 57 N/mm | ≥ 65 N/mm |
| Pemanjangan saat Istirahat | ≥ 700% | ≥ 700% |
| Ketahanan Retak Stres | ≥ 500 hours | ≥ 1000 hours |
| Tear & Puncture Resistance | Standar | Enhanced |
| Tahan UV | Luar biasa | Luar biasa |
| Resistensi Kimia | Luar biasa | Luar biasa |
| Estimated Service Life | 30+ tahun | 50+ tahun |
| Cost Level | Sedang | Higher |
Key Differences Between GM13 and GM17
1. Mechanical Strength
GM17 offers higher tensile strength, puncture resistance, and tear resistance, making it suitable for projects with steeper slopes, higher loads, or rough subgrades.
2. Long-Term Durability
With double the stress crack resistance, GM17 provides superior long-term performance under continuous stress and aggressive environmental conditions.
3. Engineering Safety Margin
Engineers specify GM17 to achieve a higher safety factor in critical containment systems where minimizing failure risk is essential.
GM13 or GM17: Which Should You Choose?
| Jenis Proyek | Recommended Standard |
|---|---|
| Kolam akuakultur | GM13 |
| Irrigation reservoirs | GM13 |
| Lapisan kanal | GM13 |
| Municipal landfill | GM17 |
| Tailing pertambangan | GM17 |
| Hazardous waste containment | GM17 |
Tip: Choose GM13 for cost-effective general applications, and select GM17 when regulatory compliance and long-term reliability are top priorities.
Installation & Welding Considerations
Both GM13 and GM17 geomembranes are manufactured in accordance with internationally recognized specifications issued by the GRI GM13 & GM17 HDPE Geomembrane Standards, which define minimum requirements for physical, mechanical, and durability performance.
When welding thicker GM17 liners, operators should apply precise temperature control and use double-seam welding with air-channel testing to ensure joint integrity.
👉 Internal link suggestion: Mesin las geomembran HDPE.
Final Thoughts
Understanding the differences between GM13 and GM17 HDPE geomembranes helps reduce project risks and ensures compliance with international standards. Selecting the right specification not only improves system performance but also extends service life and lowers long-term maintenance costs.
If you are unsure which standard fits your project, consulting the manufacturer or requesting technical support is always recommended.
English 
Español de México 
Português do Brasil 
Русский 
Türkçe 
Bahasa Indonesia